See Video Below!
Installation
1. Prep - Clean the lens and housing thoroughly.
2. Position - Hold the alignment tab while separating the adhesive backing (opposite the tab). Do not peel with the tab before separating from the backing. Do not touch the adhesive surface!
3. Apply - Starting from the bottom edge of the optic, apply the shield while maintaining alignment. Press firmly to ensure full contact.
4. Finish - Remove the alignment tab once fully adhered. Wipe gently if needed.
Removal & Replacement
Peel from a corner to remove.
Apply a new shield before shooting to maintain a clean, carbon-free lens.
-
Note
Peeling & application requires a steady hand. Each pack includes an extra shield so you can get a feel for the process.
